Print Page | Close Window

push start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26398
Printed Date: July 23, 2025 at 10:07 PM


Topic: push start

Posted By: caozbone
Subject: push start
Date Posted: February 13, 2004 at 1:37 PM

okay, here's the deal.  i'm going to get a push start and install it in a remote location from the actual starter. 

i want to install the pushstart in the central console, are there any specific safety hazards that should concern me?  my car has the passlock ii system, would i need to bypass the passlock for a pushstart? 




Replies:

Posted By: GSaquarius
Date Posted: February 13, 2004 at 3:14 PM
what kind of vehicle do you have? what is your purpose? post your answers please so i can help



Posted By: Velocity Motors
Date Posted: February 13, 2004 at 4:08 PM
No need to bypass the Passlock II system if your key is already going to be in the igntion at the time of push start. Just wire up a 30/40 amp relay like this

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: caozbone
Date Posted: February 17, 2004 at 9:02 AM
it is a 2002 4door pontiac ga se.  my purpose is for a unique look, along with an additional security precaution.


Print Page | Close Window