viper 591 question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26432
Printed Date: May 19, 2024 at 11:36 PM

Topic: viper 591 question

Posted By: wblakes
Subject: viper 591 question
Date Posted: February 13, 2004 at 11:37 PM

ok, so the viper 591 has wires for door trigger, but are the wires just there for the heck of it or they work for door trigger? in the manual say it has no function, but there are wires for those pins so i thought i ask.

Replies:

Posted By: whitey
Date Posted: February 14, 2004 at 12:21 AM

DEI uses the same harness for many of their units for easy upgrade. For example you have the 591xv and you want to go to the 791xv. They use the same harness so it would just be a mather of pluging in the new one and wireing up the door trigers and siren.

On the remote starts from DEI the purple and green wires on the main harness serve no purpose.

-------------
Visions Edmonton
Installation Manager, DLS
MECP Certified First Class

Posted By: profuse007
Date Posted: February 14, 2004 at 12:36 AM

for remote start on 791xv, the purple is for starter wire and the green wire is for starter kill/antigrind.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: Teamrf
Date Posted: February 14, 2004 at 12:43 AM

Yea I'm not sure why DEI does that. That can confuse some people.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Print Page | Close Window