alarm not in command?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26434
Printed Date: July 16, 2025 at 7:03 AM
Topic: alarm not in command?
Posted By: BangBang
Subject: alarm not in command?
Date Posted: February 14, 2004 at 12:06 AM
ok i'm not sure wut alarm i have installed, i'll check that out tommrow. but before wen i press lock on my remote it would lock the doors and chirp. or wen i press unlock on the remote it would chirp as well. now it doesn't churp at all. wen i do press lock/unlock on the remote it will lock and unlock. just that the there is no chirp sound. also, my blue light indicator for the alarm, used to blink, but not it just stays blue.. it doesn't flash like how it used to any more. also, i tested it by, pressing lock on the remote, the car would lock, (while the window is down) then i would reach over and unlock it. and open the door. the alarm would not go off/on. no sound at all. i tried pounding on the window as well. but no alarm sounded. do you know what the problem may be? i might have pressed something? i will update with more info a.s.a.p
Replies:
Posted By: whitey
Date Posted: February 14, 2004 at 12:23 AM
sounds to me like your alarm is in "valet mode" Try takeing it out of valet mode. What brand is it? ------------- Visions Edmonton
Installation Manager, DLS
MECP Certified First Class
Posted By: BangBang
Date Posted: February 14, 2004 at 1:02 AM
ok i just found out that it is a Viper auto security system its model is 650XV
Posted By: BangBang
Date Posted: February 14, 2004 at 1:04 AM
whitey wrote:
sounds to me like your alarm is in "valet mode" Try takeing it out of valet mode. What brand is it?
how do i take it out of valdet ? i'm sorry i'm new, i just use the remote to turn on/off , i'm not sure what your talking about sorry. plz help me thanx
Posted By: JWorm
Date Posted: February 14, 2004 at 1:05 AM
Open door....hit lock....unlock....lock. Requires good timing to work. led will go out, and alarm will work again. Or...
Turn key on, turn key off, within 10 seconds press and release valet button. Or....
RTFM
Posted By: BangBang
Date Posted: February 14, 2004 at 1:09 AM
JWorm] wrote:
pen door....hit lock....unlock....lock. Requires good timing to work. led will go out, and alarm will work again. Or...
Turn key on, turn key off, within 10 seconds press and release valet button. Or....
RTFM
hit lock ... unlock.. lock... while door is open? or where is valet button? my dad took it to some place to get it installed for me he never told me about any switch where is it usualy located? wats RTFM? i'm new sorry plz helpme out
Posted By: BangBang
Date Posted: February 14, 2004 at 1:18 AM
ok i went out side to try it and and now the blue light indicator is not on at all. even wen i lock or un lock or door open or door close now what happend? i mean my remote is still working, it locks and unlocks wen i press the remote, still no chirp, this time no blue light at all.
Posted By: BangBang
Date Posted: February 14, 2004 at 1:37 AM
ok something wrong . i went back out, stuck the key in, turned it to "on" and left it for about 20 seconds, while i was looking for that switch, but coudln't find it. after i coudlnt' find it i turned the key off and pulled it out then the blue light appeared again. please help me out i dont want my head unit, my 3 sony 1000 watt amp + 4 of my 12" eclipse woofers , and my pair of 6x9 volfenhag speakers plz. along with my uner seat neon lights, and my chromed out shift knobs and hand break. along wtih my bandpass customezed under feet bass tubes plz help me out. i would really appreciate it. Thanx alot
Posted By: johnwharrison
Date Posted: February 14, 2004 at 10:02 AM
BangBang wrote:
please help me out i dont want my head unit, my 3 sony 1000 watt amp + 4 of my 12" eclipse woofers , and my pair of 6x9 volfenhag speakers plz. along with my uner seat neon lights, and my chromed out shift knobs and hand break. along wtih my bandpass customezed under feet bass tubes plz help me out. i would really appreciate it. Thanx alot
Is somebody showing off here? RTFM= Read The (Fine?) Manual
Posted By: whitey
Date Posted: February 14, 2004 at 10:27 AM
When the 650 is in valet mode after 1 hour the led will go from solid to off. It is power save mode. Like JWorm said .....to exit valet mode open the door and press lock, unlock , lock. Then close the door and see if you get your chirps and led flashing back. Try that ------------- Visions Edmonton
Installation Manager, DLS
MECP Certified First Class
Posted By: BangBang
Date Posted: February 14, 2004 at 11:35 AM
ok i'll try that thanx today i'm going to head out to the same place were i got it installed and ask them. i still have the reciept so yeah thanx alot whitey. i'll try that again let say it dont' work . do i have to wait several minutes before i do it again?
Posted By: BangBang
Date Posted: February 14, 2004 at 2:55 PM
whitey wrote:
When the 650 is in valet mode after 1 hour the led will go from solid to off. It is power save mode. Like JWorm said .....to exit valet mode open the door and press lock, unlock , lock. Then close the door and see if you get your chirps and led flashing back. Try that
yeah i just got back from a 45 min drive, they guy that installed it showed me what to do, it is what u guys have told me. cuz the way i was doing it was i would pause. were, he showed me i did it rapidly with out pause. so yeah thanx guys now its chirriping like old fashion. thanx alot. i wasted $50 today to just going there $10 on gas, $30 on Valentines gift in garden grove, $10 on lunch god damn wtf is up and i only make $100 per week kill me y dont you lolz thanx again mwa take cares HAPPY VALENTINES DAY!
Posted By: BangBang
Date Posted: February 15, 2004 at 12:31 PM
yea my alarm is working but now my amp and radio is not working. so are my subs lolz ahhhah help me plz?
|