autostart remot starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26450
Printed Date: July 14, 2025 at 6:50 PM

Topic: autostart remot starter

Posted By: muaiad97
Subject: autostart remot starter
Date Posted: February 14, 2004 at 8:01 AM

hi all

i have autostart remot starter it has one pin it says gos to 5th relay

what is the 5th relay and how i conect this to secand ignition

Replies:

Posted By: Velocity Motors
Date Posted: February 14, 2004 at 9:19 AM

Depending on the model number, this unit will already have a relay built into it. If the wire is a (-) output then you need to use this diagram for the 2nd ignition. If it's a (+) output them wire it straight to the 2nd ignition.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: kgerry
Date Posted: February 14, 2004 at 1:30 PM

on the Autostart product that green wire for 5th relay is factory defaulted as Ignition 2. There are little jumper pins on the back of the main module if you wish to change this to Starter ( Crank ) 2 or Accessory 2. defualt tho is already Ignition 2

Print Page | Close Window