door locks unlocks problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26605
Printed Date: July 14, 2025 at 2:18 PM
Topic: door locks unlocks problem
Posted By: muaiad97
Subject: door locks unlocks problem
Date Posted: February 16, 2004 at 10:08 PM
Hi all i installd remot starter autostart model 1414 its working fine. but i have problem with the door lock unlock. the starter has negative _ output i conect every thing ok but still dosnt work the parking lights flashing when i push lock unlock bottoms but dosnt lock or unlock the doors . any help pleas thanks
Replies:
Posted By: draasch
Date Posted: February 16, 2004 at 10:50 PM
we kinda need to know what kind of car you have????? ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: erinh
Date Posted: February 16, 2004 at 10:54 PM
the parking lights will flash even if you don't have the door lock/unlock wires hooked (correctly/or at all) up as long as you have the parking light correct.
Posted By: auex
Date Posted: February 16, 2004 at 10:56 PM
Again, Vehicle???
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: kgerry
Date Posted: February 17, 2004 at 10:15 AM
the lights will flash regardless of whether you hook up the door locks or not..thats normal... again if you need help with the keyless feature we need to know what type of vehicle its in...we're not psychic
Posted By: muaiad97
Date Posted: February 17, 2004 at 7:50 PM
the car is intrepid 97
Posted By: mobiletoys2002
Date Posted: February 17, 2004 at 7:55 PM
Your door locks are positive pulse not negative pulse, so if you did it negative that is why it don't work!!
Posted By: mobiletoys2002
Date Posted: February 17, 2004 at 7:57 PM
ORANGE / white is lock and pink/purple is unlock (the wires are located in a white plug back of fuse poanel
Posted By: muaiad97
Date Posted: February 17, 2004 at 8:32 PM
thank u all Iknow the car has positive puls but i am talking about the remot starter has negative output
Posted By: mobiletoys2002
Date Posted: February 17, 2004 at 8:40 PM
so use 2 relays convert the nagative to positive !! the info is on the relay section of this site.
Posted By: muaiad97
Date Posted: February 17, 2004 at 9:25 PM
thanx again all I did that i used 2 relay but didnt work i tried to chek any puls from the remt unit when i push lock unlock bottoms no any voltage . i mean lock unlock wires . no any voltage on these wires . i used the diagram in this sit but didnt work.
Posted By: mobiletoys2002
Date Posted: February 17, 2004 at 9:49 PM
your ground on the unit may be bad try a different grounding point on the alarm, if not maybe the unit has a blown output for the door locks!
Posted By: kgerry
Date Posted: February 18, 2004 at 9:08 AM
test the outputs from the 1414, they are a transistor output and not very forgiving if you hook them up wrong...you may have blown the DRL outputs on the unit itself
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|