Trunk Release in 2003 Neon

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26618
Printed Date: May 16, 2024 at 9:27 AM

Topic: Trunk Release in 2003 Neon

Posted By: N0tjustsomeguy
Subject: Trunk Release in 2003 Neon
Date Posted: February 17, 2004 at 7:15 AM

I have a clifford matrix I installed with keyless entry. I want to hook up my trunk release but can't figure out exactly how. I know I have to run my alarm to the factory keyless entry system but my problem is I am not sure where I need to connect it to my alarm. I no longer have the installation manual for my alarm and was hoping that someone here might be able to offer some advice.

Replies:

Posted By: N0tjustsomeguy
Date Posted: February 17, 2004 at 9:07 AM

Nevermind, found the installation manual for my alarm so I have the wiring diagram now

Posted By: derek123
Date Posted: February 17, 2004 at 11:59 AM

Trunk pop should be BROWN / ligth blue (-) at the switch in the glove box.

Print Page | Close Window