Any body have a wiring diagram for this unit? Viper 150 HF or could you let me know how to set the tach input wire.. I have a 2001 dodge dakota, every thing works locks, lights, it starts but the starter keeps on turning. Checked all wire colors and it seems that it is all ok. Any ideas ? let me know , thanks.
-------------
Factory security systems suck!
One my guys had this problem about a week ago. On that one he made a mistake on the start wire and hooked it up to a ingition out put from the alarm. I don't think that it is a problem with your tach, because I'm pretty sure that all DEI product will crank the starter for only 6 seconds at the most. But to answer your question to program the tach, Start the vechile and hold the push button untill you see the red LED light constant then let go.
-------------
Matt
Always remember to test wires with a Digital Multimeter!
I think your right on the start wire, because it should'nt keep turning over usually the start wire will stop and start again if it did'nt get a proper tach signal. Brain fart or something. On those remote starters it shows the manual on the back and thats what i went off of, and the plug that the start wires are they are not in the order that it shows like the other main plug. red, red, yellow, violet, pink.. Its printed the other way pink, violet, yellow, red ,red.. I'll try switching the start and acc. wires this weekend. thanks again...
-------------
Factory security systems suck!
By the way, NICE QUOTE!
I like it.
-------------
Matt
Always remember to test wires with a Digital Multimeter!