Print Page | Close Window

3 rd ignition wire question?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26645
Printed Date: July 12, 2025 at 3:12 PM


Topic: 3 rd ignition wire question?

Posted By: Duston
Subject: 3 rd ignition wire question?
Date Posted: February 17, 2004 at 1:23 PM

hello again, i have three ignition wires my remote start only has two ignitions output wires. So i need to add a relay right ,  but the remote start does not have any neg output during remote start or anything like that...   Any help to add a relay to make this work??      is there a way to tap into one of the other ignition wires and add the third relay?   thanks

-------------
Factory security systems suck!



Replies:

Posted By: sufferrar
Date Posted: February 17, 2004 at 1:28 PM
what car and what alarm do you have?

-------------
"I'm So Loud It Hertz"



Posted By: kgerry
Date Posted: February 17, 2004 at 1:41 PM
yes, you just add a relay and use one of the two existing ign wires to turn on the relay which will then send 12V to the third ign wire



Posted By: draasch
Date Posted: February 17, 2004 at 1:45 PM
https://www.wiringinstructions.com/235.htm

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Print Page | Close Window