Print Page | Close Window

95 Toyota Previa light flash

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26652
Printed Date: July 13, 2025 at 12:23 AM


Topic: 95 Toyota Previa light flash

Posted By: befranklin
Subject: 95 Toyota Previa light flash
Date Posted: February 17, 2004 at 4:22 PM

I am current newby installing a DEI Diablo2 alarm and have found all the wires except one the parking light flash. Do you know if the parking light wire from the switch is a negative output? I tested it with a DMM but didn't get any readings. I guess if it was negative output I shouldn't see any readings. I would like to jus ground the wire from the switch and they should turn on or indicate closed circuit if I use Ohm on my DMM but don't want to short anything out. I believe the wire at from the switch is white to the connector and is Green-Black after. Should I use a relay if it is?
I should mention that the alarm has a positive and negative out-put

Bernieposted_image



Replies:

Posted By: kgerry
Date Posted: February 17, 2004 at 5:30 PM
parking light wire should be green in the DKP and it's positive



Posted By: befranklin
Date Posted: February 17, 2004 at 9:50 PM
Nope,

Its in the seat belt relay box green-red wire and it's negative it also can be wired from the switch, now if I could only figure out the door trigger wire I'd have this thing licked but I haven't figured out which wire it is and where it at.

Bernie Franklin


Print Page | Close Window