Print Page | Close Window

Viper 300 Esp / Valet 551t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26660
Printed Date: July 13, 2025 at 6:26 PM

Topic: Viper 300 Esp / Valet 551t

Posted By: flipper
Subject: Viper 300 Esp / Valet 551t
Date Posted: February 17, 2004 at 5:52 PM

I currently have a Viper 330 esp in my Pathfinder. I have the power locks, starter disable and a remote dual stage shock sensor (for a voice module). I recently purchased the Valet 551t add on remote start. Can some tell me what wires HAVE to be conntected BETWEEN the two units? I have done seperate remote starts and alarms so have some knowledge and realize what will be needed for the remote start. My main concern is the connection between the two units to allow for all features to be used.

Thanks.

Replies:

Posted By: flipper
Date Posted: February 18, 2004 at 8:20 AM

Can't anyone here help me? Do I need to provide more information? I know there are a lot of DEI istallers on here.

Print Page | Close Window