Print Page | Close Window

2004 F150 Driver Door Priority

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26721
Printed Date: July 19, 2025 at 2:13 PM


Topic: 2004 F150 Driver Door Priority

Posted By: Dolomite
Subject: 2004 F150 Driver Door Priority
Date Posted: February 18, 2004 at 11:11 AM

Has anybody wired up the driver door priority in a new 04 F150?  I've got the doors to lock and unlock using the main lock/unlock triggers which are negative ground but the wiring diagram for this vehicle shows that the driver door priority uses a 5 wire reverse polarity to unlock the drivers door and I can't figure out how to get this to work.



Replies:

Posted By: daniel2002p
Date Posted: February 18, 2004 at 12:55 PM
your alarm has to be capable of doing that in the first place.  what kind of alarm is it?

-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!



Posted By: bmf1000d
Date Posted: February 18, 2004 at 1:27 PM
You would have to wire a rest at ground relays for the drivers door and then the other for the regular locks.

-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof



Posted By: Dolomite
Date Posted: February 18, 2004 at 5:11 PM

Alarm is a Valet 554R.  This alarm has a programmable output for driver door priority.  The diagram I have only shows one wire for DD Priority but says it's a 5 wire reverse.




Posted By: NowYaKnow
Date Posted: February 18, 2004 at 5:55 PM
The wire for the driver door motor is RED / orange in the driver kick. Wire it up like so:

posted_image

Be sure to test everything. Offhand the motor side should be the side going towards the driver door and the switch side will be going towards the rear of the vehicle. Good luck,

Mike



Posted By: Dolomite
Date Posted: February 19, 2004 at 12:02 AM
That worked.  Thanks for the help!!


Print Page | Close Window