Anti-grind relay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26757
Printed Date: May 25, 2025 at 9:17 PM

Topic: Anti-grind relay

Posted By: Alpine Guy
Subject: Anti-grind relay
Date Posted: February 18, 2004 at 8:13 PM

I would like to put a setup in my truck so when my remote starter is on and i hop in my truck, and i accidentally turn my key to far, i would like a relay to kick in and cut power to the starter so i don't grind the starter.

It will be more complicated also, because i have 2 starter wires.

Thanks!

Replies:

Posted By: bmf1000d
Date Posted: February 19, 2004 at 1:15 AM

Nah all you have to do is hook up 2 relays instead of one like this

https://www.lupo.net.nz/_uploads//starter.JPG

-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Posted By: jrilla
Date Posted: February 19, 2004 at 10:04 AM

Depending on what car you have, you may only need to kill the primary starter wire. The second starter wire is only able to be engaged when the primary one is on most cars.

-------------
J Rilla

Owner/Installer

Posted By: Alpine Guy
Date Posted: February 19, 2004 at 10:30 PM

i figured it all out last night, turns out the starter kill on the alarm portion, also acts as a anti-grind when remote started.

Thanks for your replys tho.

Print Page | Close Window