03 Dakota Power Windows
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26857
Printed Date: July 12, 2025 at 7:44 PM
Topic: 03 Dakota Power Windows
Posted By: Big game
Subject: 03 Dakota Power Windows
Date Posted: February 20, 2004 at 6:22 PM
I just installed Keyless Entry and remote Start about a week ago. Everything works fine, and I am pretty happy with it. Today I tried to roll down the window, and the stupid thing isn't responding, and to top it off, none of the passenger windows are working. The door lock on all the passenger doors work, but the driver side is dead. The remote locks work as well. I checked the amp for the power windows under the hood, and it seems fine. Any suggestions would be greatly appreciated. Thank you. ------------- Mike's Bikes
Carson, CA
Replies:
Posted By: Velocity Motors
Date Posted: February 20, 2004 at 6:44 PM
Disconnect the sentry bypass module and test the windows. Post your results.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Big game
Date Posted: February 20, 2004 at 10:20 PM
Thanks, but where might that be? Is that where the Wires come into the kick panel computer? ------------- Mike's Bikes
Carson, CA
Posted By: Velocity Motors
Date Posted: February 20, 2004 at 10:50 PM
Sorry, I thought that you installed the system. The module will be a small black box in the driver's dash area. It will not look factory and one wire will be connected to the data wire on the diagnostics plug. Follow this wire to the module and unplug this module.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Big game
Date Posted: February 20, 2004 at 11:24 PM
Yea, I did install the remote Start and Keyless Entry, but the Electrical Lingo is a bit confusing to me. I will follow the wire from the Diagnostic plug to the CTM (Central Timer Module), but there are three plugs? Which one should I test? Do you know the color codes? I don't want to waste too much of your time, I know you have allot of people to help. Should I just take it back to the dealership, and have them fix it? I bought a bumper to bumper, but I might have voided the Warranty when I installed the Remote Starter and Keyless. If they open that bottom panel and see what I've done down there, they will flip out. It looks like a dang rat nest of wires, so I was hoping if anyone new of a quick fix, i.e. fuse, loose connection, or relay. The windows worked fine last night, and today they just quit on me. There was no smell of burning wires, or anything. I really appreciate your help Jeff, but I am still one confused feller. Thanks for your help and info so far, Mike ------------- Mike's Bikes
Carson, CA
Posted By: Big game
Date Posted: February 22, 2004 at 10:45 AM
Ok, I found the problem. The plug that connects to my Window Switch must have come loose and then disconnected. All I had to do is plug it back in. Remember to start from the source, and then work your way down. Never start in the middle, and work yourself over. Anyways, thanks for the attempted help Velocity Motors. At least I saved my self time and didn't have to take it to the dealership.
-------------
Mike's Bikes
Carson, CA
|