remote start in 92 Voyager

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26993
Printed Date: June 08, 2025 at 1:00 PM

Topic: remote start in 92 Voyager

Posted By: videoviking
Subject: remote start in 92 Voyager
Date Posted: February 22, 2004 at 9:05 PM

Starter cranks, but engine doesn't catch. The brain has two extra Ignition "On" wires. The manual says one is to be used if a second ignition on is needed, and the other is to be used for AC. The question is, does the Voyager need the second ignition, and if so, what wire is it? and the next one is where is the tach wire

-------------
Chuck Johnston

Replies:

Posted By: BNLUIS
Date Posted: February 22, 2004 at 9:10 PM

TACHOMETER|gray,RED / yel,blu/yel| |coil pack *1

Notes:
*1 The 3.3, 3.5, and 3.8L V6 engines use a triple coil pack. Wire colors are for 2 cylinders each. The gray wire may also be gray/black

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Posted By: videoviking
Date Posted: February 22, 2004 at 11:04 PM

BNLuis,

Okay, my next question is where is the coil pack There is a row of relays on the drivers fenderwell, and then I have one wire from the brain that says to attach to the oil pressure switch or to wrap around the coil wire. Or, should I just make three leads and attach them to the coil wires and then into the tach sensor on the alarm?

-------------
Chuck Johnston