Print Page | Close Window

Clifford RSX 3.5, 1999 Dodge Durango

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27121
Printed Date: May 15, 2025 at 6:22 AM


Topic: Clifford RSX 3.5, 1999 Dodge Durango

Posted By: jacook81
Subject: Clifford RSX 3.5, 1999 Dodge Durango
Date Posted: February 24, 2004 at 11:56 AM

i'm installing a clifford RSX 3.5 into a 1999 Dodge durango, the problem i'm having is with the ignition and acc. connections.  The wiring diagram I have says:
IGN   DK Blue
IGN2 Blk/org
ACC  BLk/org

this is from the12volt.com

I also found this:
ign   DK Blue
Acc  Blk/Org
acc2 Blk/whit

However, in the harness of about 25 wires, none are just dk/blu.  When I put a meter on all the pins, i find a blk/whi that appears to be ign, and a brwn/green  that appears to be an acc.

but they are all small wires.  Usually they are bigger, ie) Ford/GM

What wires should I use??

Thanks!




Replies:

Posted By: JMaxx93
Date Posted: February 24, 2004 at 12:22 PM
techsoft states your latter listing as correct.  what i would do is find the key switch and look in relation to that under the dash.  i can't remember exactly what a durango looks like but i don't remember there being anything special about it.


Print Page | Close Window