Toyota Tundra 2004

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27174
Printed Date: May 20, 2025 at 12:06 AM

Topic: Toyota Tundra 2004

Posted By: POWER
Subject: Toyota Tundra 2004
Date Posted: February 24, 2004 at 10:19 PM

the vehicle is toyota tundra double cab 4dr limited 2004 v8.i need the wire diagram for the power lock.
the system of the power lock is double pulse. i try with sequoia diagram power door but doesn't work and i try with the toyota tundra 2003 but doesn't work . can someone help me to find the program for the power lock diagram. if someone find it and can tell where is locate.can i tested with the circuit tester to locate the negative or to cut any wire for the function..
thanks...

-------------
MASS

Replies:

Posted By: RMEYER
Date Posted: February 24, 2004 at 10:40 PM

power,

i have worked on the toyota tundra 04 model with factory keyless entry, what i did was 5 wired the driver unlock motor wire, and the passenger motor wire for unlock and i five wired the lock motor wire at the keyless entry module

the keyless entry module is sitting flat , located behind the fuse box, if you unbolt the fusebox and move it out of the way you can access the wires for the keyless entry, if i remember correctly the wires were on the right side of the module in the right plug. they will test positive .

-------------

Print Page | Close Window