Print Page | Close Window

push button start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27224
Printed Date: July 15, 2025 at 1:25 AM


Topic: push button start

Posted By: Sandungero24
Subject: push button start
Date Posted: February 25, 2004 at 5:37 PM

how can i use my horn button to start my car????????????

but i dont want the horn sound when i start my car




Replies:

Posted By: Velocity Motors
Date Posted: February 25, 2004 at 6:14 PM
Use this diagram and take pin 85 and attach a (-) horn output to this wire instead. Just be careful though because everytime you press the horn again, it will turn over the starter circuit.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: Sandungero24
Date Posted: February 25, 2004 at 6:23 PM

I CANT USE BOHT?

START MY CAR WIHT MY HORN BUTTON AND THEN WHEN

MY CAR IS ON. USE MY HORN NORMAL




Posted By: technodigifreak
Date Posted: February 25, 2004 at 11:51 PM
SANDUNGERO24 wrote:

I CANT USE BOHT?

START MY CAR WIHT MY HORN BUTTON AND THEN WHEN

MY CAR IS ON. USE MY HORN NORMAL

you get either/or on that setup, unless you want to get complex using several relays and an IC chip to control everything--not recommended for beginners



-------------
Hot-Modder


Print Page | Close Window