Cruddy Autoloc schematics!
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27455
Printed Date: July 27, 2025 at 6:22 AM
Topic: Cruddy Autoloc schematics!
Posted By: babydeuce
Subject: Cruddy Autoloc schematics!
Date Posted: February 29, 2004 at 3:00 PM
Hey folks,
First post here, but have been browsing the forums for some time.
I just purchased some autoloc components for a custom install of power windows, and remote locks for my 63 Chevy II. I do avionics for the military, and wiring is a snap, but these autoloc schematics really blow! Nothing is labeled for signals or polarity, and they want you to just wire it up. Unfortunetly, this wont work for me, and I have alot of other stuff that needs to be tied in.
So, does anyone have any decent schematics for the KL600 remote entry system, or autoloc 5 wire actuators, and possibly for their illuminated window switches?
Any help would be appreciated!
Jack
Replies:
Posted By: draasch
Date Posted: February 29, 2004 at 9:23 PM
the 5 wire sounds like a central door lock system....as far as the switches for the windows, what are you looking for???? have you tried spal's site?? they have a tech number there they might be able to help.. ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: babydeuce
Date Posted: February 29, 2004 at 11:36 PM
David,
I already have the switches, and yes, the actuators are part of the CK2000 central locking system with the KL600 remote entry unit. I already tried the tech line, they emailed me the same schematic that came with the system, and it is pretty useless!
Jack
Posted By: draasch
Date Posted: February 29, 2004 at 11:39 PM
ok. what is it that you are having problems with?? ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: babydeuce
Date Posted: March 01, 2004 at 10:12 AM
I need a schematic with signals and polarity for the central locking system "brain" and the actuators. The KL600 schematic is pretty well defined. I need to be able to test the actuators without the "brain" hooked up. Also, I have a green wire comming off the main module that is not even listed on the schematic.
Jack
|