bypassing sensors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27526
Printed Date: August 14, 2025 at 11:57 AM

Topic: bypassing sensors

Posted By: SPS70129
Subject: bypassing sensors
Date Posted: March 01, 2004 at 4:37 PM

ok, this is what i have a viper alarm(can't recall the model # off hand, had it for awhile) and I also have an impulse add-on remote start module, everything works wonderful. My problem is that the viper model that i have has a built-in shock sensor. So when i start the car the alarm goes off, I've just been turning the alarm off and starting the car, but a turned off alarm = no protection!! So does anyone know how to bypass the built-in shock sensor???

Thanks

Replies:

Posted By: lakas187
Date Posted: March 01, 2004 at 4:44 PM

You should be able to bypass the sensor thru your remote.do you still have your owner's manual?

Print Page | Close Window