96 ford explorer factory gone crazy

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27596
Printed Date: May 04, 2024 at 5:39 AM

Topic: 96 ford explorer factory gone crazy

Posted By: mobiletoys2002
Subject: 96 ford explorer factory gone crazy
Date Posted: March 02, 2004 at 5:17 PM

I have a customer that camne in with a factory remote that does not disarm the alarm but only unlocks the door,he says the alarm stops sounding when he turns his key on. Now he says this happened after he disconnected his battery to clear a check engine light he had. Any ideas on how i cvan try and reprogram this thing and see if it gets better??????

Replies:

Posted By: jfk51502003
Date Posted: March 05, 2004 at 3:32 PM

WHAT KIND OF CAR?????

Posted By: daniel2002p
Date Posted: March 05, 2004 at 9:54 PM

jfk51502003 it is a 96 ford explorer, as stated in the subject line, as far as fixing that, had the sme thing happen, have to reprogram remote, do not know how to do it, but the local dealership did it for free for our cust.

-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Posted By: Velocity Motors
Date Posted: March 05, 2004 at 10:04 PM

To program a 1996 Ford OEM remote FOB:

1.Insert the keys in the ignition and turn the ignition switch from OFF to RUN, five times within ten seconds, ending in RUN. If the vehicle has successfully entered the program mode, it will lock and then unlock all doors automatically.
2.Press ANY button on a keyless entry remote transmitter and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been activated. NOTE: When the first keyless entry remote transmitter is programmed, all existing keyless entry remote transmitters are erased.
3. Repeat the previous step for each transmitter that will operate the vehicle.
4.If the door locks do not respond for any keyless entry remote transmitter, wait 10 seconds and press the button again

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA