disable/enable auto locking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27670
Printed Date: May 21, 2024 at 3:28 PM

Topic: disable/enable auto locking

Posted By: DaveK
Subject: disable/enable auto locking
Date Posted: March 03, 2004 at 4:24 PM

I just had a Python 881 installed and it works great. I would like to disable the auto locking feature so that I can disable the factory one and then enable the auto lock feature on the Python. Can anyone help me out? I'd rather not have to take the truck in to have it done as the installer isn't local to me.

Thanks.

Replies:

Posted By: Toru
Date Posted: March 03, 2004 at 4:58 PM

"I would like to disable the auto locking feature so that I can disable the factory one and then enable the auto lock feature on the Python."

By "autolock" do you mean "lock/unlock with arm/disarm" or "lock with igition on/unlock with ignition off"?

It isn't clear which autolock you want to known how to disable, the truck or the Python.

If it is the truck, you probably need to say what make/model/year truck it is.

Posted By: daniel2002p
Date Posted: March 03, 2004 at 5:02 PM

so in english what you are trying to do is disable the auto doorlock and your car and anable the one that the python does. if so please provide the cars model and year.

-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Posted By: DaveK
Date Posted: March 03, 2004 at 8:46 PM

I already know how to enable/disable for my truck. I would like to know how to disable the lock with ignition on /unlock with ignition off. And then how to enable the ignition on /unlock with ignition off after I disable the truck's system.

Thanks.

Posted By: chriswallace187
Date Posted: March 03, 2004 at 10:24 PM

Go to www.directed.com, and look up the installation manual for the Python 881. There will be a few pages describing how to change the program settings using the valet switch and the Python remote. You'll want to change the ignition controlled lock and unlock to off using the instructions given there, and you should be able to change both by using your remote and the valet switch.

Posted By: DaveK
Date Posted: March 04, 2004 at 12:49 PM

Thanks! That's exactly what I was looking for, Chris. I appreciate the info.