Alpine SEC-8052

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27703
Printed Date: July 21, 2025 at 10:50 AM

Topic: Alpine SEC-8052

Posted By: kruzmsl
Subject: Alpine SEC-8052
Date Posted: March 04, 2004 at 2:59 AM

Ok here goes. I finally got around to installing my Alpine SEC-8052 but I need the programming, impact sensor adjustment instructions. I tried to follow this [url]https://www.the12volt.com/installbay/forum_posts.asp?tid=4856&KW=adjust+alpine+[/url] but all it seems that I accomplished is causing my remotes to stop working. I do not have a perimiter sensor, just the shock sensor so all I need to do is get my remotes working again and increase the sensitivity of the shock sensor. Does anyone have the full programming instructions for this alarm?????!!!!!!!! PLEASE PLEASE HELP!!!!!!!!

Replies:

Posted By: kruzmsl
Date Posted: March 04, 2004 at 4:47 AM

Ok,I got the remotes to program, well sort of. For some reason they would program but not work as car 1 so I switched the alarm to car two and they worked. Weird. Anyway I still need instructions on how to adjust the impact sensor without a radar sensor.

Posted By: kruzmsl
Date Posted: March 04, 2004 at 4:53 AM

Ok I was reading Alpine's site and I figured out I had my remotes set on car 2 mode while I was trying to program them. I like the system but I am not used to alpine systems. posted_image

Now if I can get the shock sensor adjusted I will be happy!!.