Print Page | Close Window

clutch bypass 2001 ford f150

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27728
Printed Date: May 15, 2025 at 2:53 PM


Topic: clutch bypass 2001 ford f150

Posted By: KOOLAID421
Subject: clutch bypass 2001 ford f150
Date Posted: March 04, 2004 at 3:08 PM

need to know how to bypass the clutch in a 2001 ford f150. need to do this so my remote start will start the truck. the clutch switch has 6 wires on it and i cant figure this out    please help

-------------
hell yea



Replies:

Posted By: boomer_106
Date Posted: March 04, 2004 at 3:18 PM

Looks like its DK Blue/ Orange. and positive polarity.

Ford

Pickup (F150/F250)

1997-2002

Remote Starter  Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Start:

 

RED / LT. BLUE

IGNITION SWITCH HARNESS

Ignition  #1:

 

DK. BLUE/LT. GREEN

IGNITION SWITCH HARNESS*

Ignition #2:

 

RED / BLACK

IGNITION SWITCH HARNESS

Ignition  #3:

 

GRAY / YELLOW

IGNITION SWITCH HARNESS

Accessory:

 

BLACK/ LT. GREEN

IGNITION SWITCH HARNESS

Brake  Light:

 

GREEN

AT SWITCH ABOVE BRAKE PEDAL

Tach  Signal:

 

RED / GREEN

AT COIL MODULE

Parking Lights:

 

DK. BROWN

AT HEADLIGHT SWITCH

Headlights:

 

OEM Alarm  Disarm:

 

GREEN/ VIOLET

AT FACTORY ALARM MOD.@ DR. FIREWALL

OEM Alarm  Arm:

 

Diesel  Glow Plug:

 

BLACK/ PINK (+)

AT "WAIT TO START" LIGHT

Clutch  Bypass Wire:

 

DK. BLUE/ORANGE (+) LT. DUTY

WHITE/ PINK (+) HEAVY DUTY TRUCKS

Notes:

 *1998+ May be equipped with Ford's PATS Transponder Theft System. Use Universal Alarm Bypass Module part # 2x402 where X can be any number.


Ford

Pickup (F150/F250)

1997-2002

Alarm and Keyless  Entry Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Constant  +12 Volts:

 

YELLOW & LT.GREEN/ PURPLE (+)

IGNITION SWITCH HARNESS

Starter  Kill:

 

RED / LT. BLUE

IGNITION SWITCH HARNESS

Ignition  +12 Volts:

 

DK. BLUE/LT. GREEN

IGNITION SWITCH HARNESS*

Dome  Lights/Superv:

 

BLACK/ LT. BLUE (+)

PIN SWITCH OR COURTESY LIGHT

OEM Horn:

 

YELLOW/LT. GREEN (-)

STEERING COLUMN HARNESS

Power  Lock:

 

PINK/LT. GREEN (-)

FIND WIRES IN PASSENGER KICK PANEL **

Power  Unlock:

 

PINK / YELLOW (-)

FIND WIRES IN PASSENGER KICK PANEL **

Trunk  Release:

 

Alarm  Input Wire:

 

BLACK/ LT. BLUE (+)

PIN SWITCH OR COURTESY LIGHT

Notes:

** If Equipped With Factory Keyless Entry, See Note #201 - Negative Pulse Door Lock Diagram. Without Keyless Entry, See Note #203 - Reverse Polarity Door Lock Diagram.





Posted By: KOOLAID421
Date Posted: March 04, 2004 at 3:22 PM
ok but how do i bypass it

-------------
hell yea




Posted By: boomer_106
Date Posted: March 04, 2004 at 3:29 PM
Well I assume your remote start is capable of doing a manual transmission so the directions should tell you which wire from the unit is to go to the clutch bypass wire. You need to make sure you observe polarity as well. To get the best help you should post what kind of remote starter and if you dont understand the directions then type in what they say for clutch bypass and perhaps someone can help you.




Posted By: KOOLAID421
Date Posted: March 04, 2004 at 3:33 PM
the remote start is a directstart cs423 it does not tell me what i need to do

-------------
hell yea




Posted By: KOOLAID421
Date Posted: March 04, 2004 at 4:00 PM
please help


-------------
hell yea




Posted By: cbag1
Date Posted: March 04, 2004 at 4:42 PM

add relay to WHITE/ green to get positive out.

goodluck





Posted By: boomer_106
Date Posted: March 04, 2004 at 9:34 PM

Try this link its an ask our experts for this model. I am not familiar with it so I have no idea if it is capable of manual or not.

https://www.12voltshop.com/askexpert.asp?prodid=CS423





Posted By: 97gss
Date Posted: March 05, 2004 at 1:19 PM
Also, you could take the starter output wire from the remote start and connect it directly to that wire.  I had the same situation on an 95 f-150.




Posted By: 97gss
Date Posted: March 05, 2004 at 1:19 PM
Also, you could take the starter output wire from the remote start and connect it directly to that wire.  I had the same situation on an 97 f-150.





Print Page | Close Window