30 Amp relay for starter kill?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2784
Printed Date: July 21, 2025 at 8:25 PM

Topic: 30 Amp relay for starter kill?

Posted By: TheGrog
Subject: 30 Amp relay for starter kill?
Date Posted: August 14, 2002 at 6:57 PM

OK, I have located all the wires to connect my alarm system (a Vampire system). It is a remote alarm & start with keyless entry.

My only unanswered question is there is a wire on the harness (of the control module) that says "Connect to a 30 Amp. relay for starter kill (-) output"

I have a 1991 Toyota Camry so what & where do I connect this wire? I have looked up this problem and it has the start and start kill wires being the same (Black & white in the Ignition switch harness). Do I connect these to the same wire?

Please help, very confused.

Replies:

Posted By: JayBrown1
Date Posted: August 15, 2002 at 6:57 PM

Yes, you will connect both of these to the same starter wire. The starter kill will be wired inline with the starter wire, and you will need to connect the remote start wire to the starter side of the starter kill relay.

Check out this page for info on how to wire up the relay. Remember to hook up the remote start output wire to the starter motor side of the relay.

https://www.the12volt.com/relays/page2.asp#sk1

Hope this helps.

Print Page | Close Window