Print Page | Close Window

Matrix 3.5 ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27984
Printed Date: May 15, 2025 at 2:03 AM


Topic: Matrix 3.5 ?

Posted By: specialblendj
Subject: Matrix 3.5 ?
Date Posted: March 08, 2004 at 2:36 PM

I installed a matrix 3.5 alarm, havent hooked up the remote start yet.  Everytime I dissarm the alarm, the remote beeps 4 times, and the door and sensor icons flash, telling me that a door has been opened and the shock sensor has gone off, but they havent.  It has always done this, and the door triggers and shock sensors function properly as far as setting the alarm off when a door is opened or the car is bumped. 



Replies:

Posted By: JMaxx93
Date Posted: March 08, 2004 at 3:06 PM
you must hook up the heavy gauge harness and the pink heavy gauge wire not being wired to ignition is the reason for all of your problems.

-------------





Print Page | Close Window