how do i use 451M module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27995
Printed Date: May 03, 2024 at 9:54 PM

Topic: how do i use 451M module

Posted By: proinstall
Subject: how do i use 451M module
Date Posted: March 08, 2004 at 5:39 PM

in a S2000, type C locks..

im not great with 5 wire.. so if anyone could help me with the wiring.. :)

Replies:

Posted By: proinstall
Date Posted: March 10, 2004 at 7:52 PM

TTT

Posted By: proinstall
Date Posted: March 10, 2004 at 10:17 PM

nobody has ever used one of these?

where does the purple wire go for type C locks?

Posted By: serialthrlla
Date Posted: March 11, 2004 at 2:02 AM

purple goes to 12v constant

Posted By: sroth140
Date Posted: March 11, 2004 at 2:40 AM

i dont have my micro relay book with me... is C the add actuators or ............... actually i think its 5 wire... if its 5 wire, its not hard to do but its a lot to type. try a google search.

-------------
MECP certified installer

Posted By: proinstall
Date Posted: March 11, 2004 at 4:32 AM

Hmmm.. well after some research.. I found that there are 2 wires coming out of the keyless module for door locks that are plain old (-) pulse.. Many aftermarket installs have used these wires with no problem.. I wonder why techsoft says type C.. :confused:

Posted By: sroth140
Date Posted: March 11, 2004 at 12:13 PM

ha, maybe no one in cluded a * for models with keyless entry. take a fuse holder with a 1amp fuse and ground each wire, see if it works.

-------------
MECP certified installer

Posted By: cbag1
Date Posted: March 11, 2004 at 2:47 PM

put the WHITE/ black and BROWN / black wires to ground

put the purple and PURPLE / black wire(s) to 12v

the remaining blue/black and GREEN/ black wires will be your lock and unlock output.

goodluck

Posted By: FullForce
Date Posted: March 11, 2004 at 3:51 PM

proinstall wrote:

Hmmm.. well after some research.. I found that there are 2 wires coming out of the keyless module for door locks that are plain old (-) pulse.. Many aftermarket installs have used these wires with no problem.. I wonder why techsoft says type C.. :confused:

Omega says type c also

Posted By: kickyride
Date Posted: March 11, 2004 at 10:27 PM

It depends on the year. '00-02 is a type C or reversal rest at ground but '03 can be done as a negative pulse.

-------------
Mike
Sales/Tech Support - KICKYRIDEoCOM mobile electronics
MECP 1st class-Security Specialist

Print Page | Close Window