92 Accord door trigger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28009
Printed Date: May 09, 2025 at 6:25 PM

Topic: 92 Accord door trigger

Posted By: itmdtr
Subject: 92 Accord door trigger
Date Posted: March 08, 2004 at 7:51 PM

I hooked the door trigger wire (brown), to the BLACK/ white wire at the brown plug. Alarm works for all doors, except the driver door.

Do I need to run another wire to the drivers door pinswitch and diode isolate it from the others? (Or is there another BLACK/ white wire under the dash)

Car: 1992 Accord DX, 4Door

Alarm: Prestige APS-255

-------------
itmdtr

Replies:

Posted By: Velocity Motors
Date Posted: March 09, 2004 at 12:20 AM

That wire is suppose to have triggered all doors. Make sure that the driver's door pin wire is infact receiving 12 volts when pin is depressed and ground when open.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: rknj01
Date Posted: March 09, 2004 at 12:46 AM

some times the door pins get dirty, i use contact cleaner

Posted By: itmdtr
Date Posted: March 09, 2004 at 5:17 PM

Checked it out today: the pin switch was dirty.

thanks rknj01

-------------
itmdtr

Print Page | Close Window