Print Page | Close Window

Autopage 850lcd, 92 Bonneville

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28032
Printed Date: July 12, 2025 at 3:08 PM


Topic: Autopage 850lcd, 92 Bonneville

Posted By: jeffbayne
Subject: Autopage 850lcd, 92 Bonneville
Date Posted: March 08, 2004 at 11:33 PM

Hey guys, this coming weekend i'll be putting an 850 in my bonneville.  I have the VATS chip in my key, and have a Designtech module for that.  I've gotten the wire diagrams off of here.  Anything special I need to know???  Any heads up about this alarm, or the car?

Thanks guys!

jeff



-------------
ECD 416~*~5061~*~Kimber Select~*~DAC 348~*~PA2~*~XM3~*~202m~*~160-03kx~*~NX-30~*~DDC-R17F~*~ZR600~*~88120dvc~*~Zeronoise~*~Yellowtop



Replies:

Posted By: Velocity Motors
Date Posted: March 08, 2004 at 11:46 PM
Is this for the SSE or SSEI  or a lower model ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: JakeJ
Date Posted: March 08, 2004 at 11:48 PM

    I am not familiar with the alarm but the vats bypass should be a snap.   Good luck this weekend!

-------------
Wyoming 12volt Enthusiast




Posted By: jeffbayne
Date Posted: March 09, 2004 at 1:29 AM
base model SE.  not supercharged.

-------------
ECD 416~*~5061~*~Kimber Select~*~DAC 348~*~PA2~*~XM3~*~202m~*~160-03kx~*~NX-30~*~DDC-R17F~*~ZR600~*~88120dvc~*~Zeronoise~*~Yellowtop




Posted By: Velocity Motors
Date Posted: March 09, 2004 at 8:41 AM

(+) Type door lock system : If your system does not have alternating polarity door locks, then you need relays to convert the signal of the (-) to a (+), use this diagram.

OEM Alarm Disarm : Wire is located in the dirver's kick panel and is light green in color. Will test (-) when unlocked.

Tachomeetr Wire : This wire is PURPLE / WHITE and is located at the ignition module or a WHITE wire the instrument cluster on models with a tachometer

VATS bypass: You can either buy a module to install which will autodetect the resistor value and save you time or you can measure the chip in the key and use this diagram for a home built module.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA





Print Page | Close Window