1996 mazda 626 door lock/unlock
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28080
Printed Date: July 22, 2025 at 5:59 PM
Topic: 1996 mazda 626 door lock/unlock
Posted By: spmfilter
Subject: 1996 mazda 626 door lock/unlock
Date Posted: March 09, 2004 at 8:01 PM
I have a 1996 mazda DX with power door locks (if you lock with drivers door key). I would like to add keyless entry. I have read on here that I might be able to tap some wires at tan module near the hood release, but other posts say that I have to put a door lock actuator on the drivers side door. I don't want to put an actuator in the door if I can avoid it. I could not find the BROWN / yellow, white wires at the tan module. Is there another way?
Replies:
Posted By: DanDan
Date Posted: March 09, 2004 at 8:15 PM
You have to add a door lock motor. There is no door lock motor in the drivers door. So adding it is a must. No mystery wires exist. Sorry.
DanDan
Posted By: spmfilter
Date Posted: March 10, 2004 at 8:01 AM
Maybe I am wrong but it seems like if I lock the passenger door the drivers side door is locked too. I will have to check that though.
Posted By: Velocity Motors
Date Posted: March 10, 2004 at 9:34 AM
For lock use yellow (-), and for unlock use orange (-) and brown (-) on keyless versions. Non-keyless versions require an actuator in the drivers door.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|