Print Page | Close Window

dei window module w/prox sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28135
Printed Date: May 28, 2024 at 10:40 PM


Topic: dei window module w/prox sensor

Posted By: mxxmikexx
Subject: dei window module w/prox sensor
Date Posted: March 10, 2004 at 3:03 PM

what would be the easiest way to make the prox sensor roll up the windows when the interior zone is set off?
if im not mistaken the dei piece needs a constant pulse (usually the armed output from alarm) to roll the windows up, so when using the prox sensor i will be working only with a negative pulse. so i will have to convert that pulse from the prox sensor into a constant pulse to feed into the window module, correct?

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106



Replies:

Posted By: Fullthrottle
Date Posted: March 10, 2004 at 5:44 PM
Check this thread out:

https://www.the12volt.com/installbay/forum_posts.asp?tid=16131&KW=roll+up


Print Page | Close Window