I have a panther 2-way pager alarm on my car and was looking to add the motion /perimeter sonsor and window roll-up modules (and down when de-armed). I was curious how to go about dowing this? My guess is to tap the motion sensor into the shock sensor, but then where do I splice the window modules in? I know this is probably a stupid question, but please bear with me as I am new to this stuff.
-------------
5.25" Components & 5x7 Coax Kappas w/Power Acoustik OV4-800
KAC 7252 powering 2 D3 8" Diamonds
KDC-MP728, KGC-4042A
as far as your sensor is concerned, you can do that easily if it has the proper polarity trigger. about the window modules, I don't know what you want, are you trying to connect them to the alarm too?
Installing Perimeter Sensor & Dual Impact Sensor Using Only One Set of Inputs
For the windows, you might not want to have the windows go down every time you disarm the vehicle. Just think of this, you quickly lock the car and you forget to get something from the back seat and when you unlock/disarm the car all the windows roll down. What you can do is put this function of an AUX channel and use the (-) when armed for the roll up option.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Thank you for the diagram, and I'm assuming that the little black boxes on the blue and green wires are diodes. Correct? What would I program the alarm AUX output to (pulsed, timed, or latched)?
Last question: How would I go about wiring in a second siren? I was thinking about placing it in the back of the hatch. The alarm has an AUX for the horn.
-------------
5.25" Components & 5x7 Coax Kappas w/Power Acoustik OV4-800
KAC 7252 powering 2 D3 8" Diamonds
KDC-MP728, KGC-4042A
Yes, they are diodes ( 1N4001 1 amp diodes ). If you are using an AUX channel for the window module, see what the modules requires. Some require a constant while other's a pulsed. If you want to wire in two or more wires, use this diagram if it's a
(+) output from alarm -------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Thank you very much. That works perfectly!
-------------
5.25" Components & 5x7 Coax Kappas w/Power Acoustik OV4-800
KAC 7252 powering 2 D3 8" Diamonds
KDC-MP728, KGC-4042A