Tach Wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28245
Printed Date: July 18, 2025 at 1:38 AM
Topic: Tach Wire
Posted By: Devil_Boy
Subject: Tach Wire
Date Posted: March 12, 2004 at 11:46 AM
Hey there,
I am installing an alarm/ with command start and just have a quick question about the tach wire. Is it possible to come of the back of the tach?? I have the complete tear down/ and rebuild book for the car (98 saturn sL1) According to the book there should be a signal wire going to the tach, make sense? So to me it would be easier to tap into that wire.
Will it still work the same?
Thanks Jeff
Replies:
Posted By: bmf1000d
Date Posted: March 12, 2004 at 1:02 PM
Yes it will and will save you from running a wire out into the engine compartment. I use the tach wire on the back of the cluster all the time and it works for me
-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof
|