Print Page | Close Window

dei 508d prox sensor wiring diag.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28361
Printed Date: May 17, 2025 at 1:32 AM


Topic: dei 508d prox sensor wiring diag.

Posted By: mxxmikexx
Subject: dei 508d prox sensor wiring diag.
Date Posted: March 14, 2004 at 4:25 PM

can someone please post a link for the dei 508d prox sensor. i lost the wiring harness for the module and need to know the wire color configuration on the harness. im sure the people who read my other post about the dei website password might not give me this info. but hopefully someone else still will.

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106



Replies:

Posted By: draasch
Date Posted: March 14, 2004 at 4:41 PM
what are the colors that you have???


-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Posted By: mxxmikexx
Date Posted: March 14, 2004 at 4:45 PM
i dont have the harness, so i have no colors. thats why i need the wire configuration so i can make a plug
its only four pins, power,ground,main zone ouput,warning zone output

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106



Posted By: laren5
Date Posted: March 15, 2004 at 3:17 AM

Hi,

I drew the following diagram, so compare it with your 508D and they should look the same.

1, 2, 3 and 4 are the four pins:

pin 1:  Blue (full trigger 1 second)

pin 2:  Green (warn away trigger  1/2 second)

pin 3:  Black (Ground)

pin 4: Red (positive)

Greetingsposted_image



-------------
Clifford Alarms



Posted By: laren5
Date Posted: March 15, 2004 at 3:25 AM
posted_image

-------------
Clifford Alarms


Print Page | Close Window