Ok, Ihit a few snags with this install. I am hooking up an Omega Max to this trooper that has a factory alarm. I hooked up the "Factory disarm "(YELLOW /GREEN) wire to the BROWN / red wire. Problem is, it seems that every time that the factory alarm has armed itself and I Disarm the Omega, the factory alarm goes off. I think it's the domelight supervision setting off the alarm. Is there a way to get the factory alarm to work in sync with the Omega?
I also need to hook up a secondary relay for the second ignition wire (BLK/RED) in order for the remote start to work. The Omega has an auxillary relay port that has three leads (-ign), (+12v), and (-acc) Does anyone know how I can add the second relay? I would run out and buy the relay kit that Omega sells BUT I can't find anywhere that carries the thing.
Lastly, I have tried numerous times to program the "echo" remote. The alarm doesn't go into program mode no matter how many times I press the valet switch. (According to the instructions you are supposed to switch ign on, then off and hit valet 5 times) Does anyone have any ideas?
I really REALLY appreciate any assistance with this thing. I have alot of experience with car audio, but alarms I avoided until now, and considering still choosing to avoid them (sigh).
hey AZ-ss, You are in double luck here. For one, I have had the exact same problem 3 weeks ago. (using Omega max) I too had 1 ignition but needed 2 Igns. Two, there is a user here named draash (David) who can sell you that RS-RP). The programming works very well. I've had no problems with it. Just follow the instructions, they work as they are written. Just there is 1 error on the last page, but that's for Tach sense on/off. Good luck. Well you already got good luck. Enjoy.