Compustar installation

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28621
Printed Date: July 15, 2025 at 9:00 PM

Topic: Compustar installation

Posted By: ammarsunfire
Subject: Compustar installation
Date Posted: March 18, 2004 at 5:55 PM

I'm installing a compustar 2 way fm remote starter on a 1998 dodge durango and i just have a few questions. I has a facctory keyless entry. On the vechicle information it shows that there is only a disarm wire, is the arm wire reverse polarity? Secondly are lock and unlock reverse polarity? and where can i find the door triggers?

Any help would be GREATLY apreciated

Replies:

Posted By: draasch
Date Posted: March 18, 2004 at 8:45 PM

Make: Dodge
Model: Durango
Year: 1998

Alarm
Constant 12 volts RED & PINK/BLACK IGNITION SWITCH HARNESS
Ignition 12 volts D BLUE IGNITION SWITCH HARNESS
Starter YELLOW IGNITION SWITCH HARNESS
Dome Light YELLOW (-) AT COURTESY LIGHT UNDER DASH
Trunk Pin Switch TAN/BLACK (-) 16 PIN CONN. BELOW FUSE BLOCK
Parking Lamp BLACK / YELLOW (+) AT HEADLIGHT SWITCH
Power Lock ORANGE / VIOLET 16 PIN CONNECTOR BELOW #203
Power Unlock PINK/VIOLET FUSE BLOCK IN DR. KICK PANEL

#203 - See Reversal Rest At Ground Door Lock Diagram.

Accessories
Window Up D\ L BLUE P\ BRN/WHT D\ BLU/WHT P\ GRY/BLK @ MAIN #211
Window Down F/ WHITE F/ PPL/WHT R/ RED / BLK R/ GRN/WHT SWITCH
Ign Key Warn L BLUE (-) IGNITION SWITCH HARNESS
Trunk Release N/A
OEM Horn BLACK/ RED (-) STEERING COLUMN HARNESS
Headlights L GREEN (+) AT HEADLIGHT SWITCH
OEM Alarm Arm N/A
OEM Alarm Disarm L GREEN/ ORANGE (-) 16 PIN CONN. BELOW FUSE BLOCK

#211- See Reversal Rest At Ground Power Window Circuit Diagram

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: Teamrf
Date Posted: March 18, 2004 at 8:55 PM

I hear those alarms are hard to install...let me know how it turns out for you. I can't wait to get to install one.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: ammarsunfire
Date Posted: March 19, 2004 at 11:02 AM

Thanks for help, this is my second compustar installation.

Posted By: frleal70
Date Posted: April 02, 2004 at 10:58 PM

Update? I'm tagging this one, because I would like to know how it turns out.

Posted By: profuse007
Date Posted: April 03, 2004 at 11:22 AM

-hey ammarsunfire, did you have to program the LCD for it to function?
i recently installed a 2wss and have to program. i thought this was weird.

-the system is really easy, i think the wires setup are pretty organized for easy install. its just like another alarm.

-the only thing diff about it is design for M/T, you can clip off the loop inside the brain for A/T. if not its on for M/T and you have to wire the ebrake and have to go through the reserve mode process for remote start.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).