Anyone have the wire code for a 2002 quad cab Dodge pickup?
I need to know if it is the same as what we have in the database for the 2000. I don't think so since the body style changed in 2002.
Oh I am also doing remote start , so I need that info also.
Thanks in advance.
-------------
Having Fun in Texas!
"LatinMax"
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | YELLOW | IGNITION SWITCH HARNESS |
Ignition #1: | | BLUE (16 AWG) | IGNITION SWITCH HARNESS |
Ignition #2: | | RED | IGNITION SWITCH HARNESS |
Ignition #3: | | GREEN & ORANGE (2 WIRES) | IGNITION SWITCH HARNESS |
Accessory: | | BLACK/ WHITE & BLUE (2 WIRES) | IGNITION SWITCH HARNESS |
Brake Light: | | WHITE/ TAN | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | TAN/RED | AT IGNITION COIL |
Parking Lights: | | PURPLE / YELLOW | HEADLIGHT SWITCH* |
Headlights: | | PURPLE / YELLOW | HEADLIGHT SWITCH * |
OEM Alarm Disarm: | | LT. GREEN/ ORANGE ***** | HARNESS COMING IN FROM DRIVER'S DOOR |
OEM Alarm Arm: | | | |
Diesel Glow Plug: | | ORANGE / Black | Powertrain Control Module*** |
Clutch Bypass Wire: | | | |
Notes: | | * This Is A Single Wire System. Parking Lights Need To See A Ground (-) Through A 330 Ohm Resistor. Headlights Need To See A Ground (-) Through A 700 Ohm Resistor. ** Diesel Vehicles - ORANGE / Black Wait to Start; Tach Wire Is Gray/Black. Both Wires Are Located In A Black Connector Center Top Of Fire Wall. There Are Two Black Connectors, The Correct One Does Not Have A White Insert. *** Tach can also be located at pin 74 behind instrument cluster. |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | PINK/BLACK | IGNITION SWITCH HARNESS |
Starter Kill: | | YELLOW | IGNITION SWITCH HARNESS |
Ignition +12 Volts: | | BLUE (16 AWG) | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | SEE NOTE *** | |
OEM Horn: | | BLACK/ RED (-) | STEERING COLUMN HARNESS |
Power Lock: | | WHITE/ GREEN | DRIVER'S KICK PANEL **** |
Power Unlock: | | WHITE/ GREEN | DRIVER'S KICK PANEL **** |
Trunk Release: | | N/A | |
Alarm Input Wire: | | SEE NOTE *** | |
Notes: | | *** Separate Triggers For Each Door. The Driver's Door Trigger Is Tan (-). The Left Rear Door Trigger Is Tan/Orange (-). Both Wires Can Be Found In The Driver's Kick Panel. The Passenger Front Door Trigger Is Tan/Red (-) And the Passenger Rear Door Trigger Is Tan / YELLOW (-). Both Of These Wires Can Be Found In The Passenger Kick Panel. Diode Isolate Each Wire For Alarm Trigger With The Bands Facing Away From The Alarm/Remote Start Module. Use Only One Trigger For Dome Light Supervision. **** Single Wire Door Lock System See Note #211. Lock Requires A Ground (-) Pulse Through A 867 Ohm Resistor. Unlock Requires A Ground (-) Pulse Through A 364 Ohm Resistor. Diode Isolate One Of The Wires. ***** Requires A Negative Pulse Through A 1.5 K-Ohm Resistor. |
-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof
What is NOTE #211....and thatnks for the quick resonse. :D
-------------
Having Fun in Texas!
"LatinMax"
Probably just a note describing how 1 wire lock systems work.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
https://www.designtech-intl.com/Content/techsupport/documents/section04/note211.pdf-------------
"Big" Mike
Double Take
Fremont, Ne
remember to check all your wires with a dmm not a test light!!
i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof