Magnetic switch to kill ignition
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28643
Printed Date: May 12, 2025 at 5:11 AM
Topic: Magnetic switch to kill ignition
Posted By: Jfk_gsr
Subject: Magnetic switch to kill ignition
Date Posted: March 18, 2004 at 11:03 PM
What you think about magnetic switch hide somewhere in the car that kill the ignition. Witch magnet attach to my key holder? I was thinking to relay it with mirror possition switch.!!! I'm newbie in that but i want to protect my car as beter i can do. I REALY NEED SOME HELP, I got good comment about this forum so will hop somebody will help me. This security system is for Integra GSR 2000 If you got any suggestion or help
Replies:
Posted By: draasch
Date Posted: March 18, 2004 at 11:17 PM
many different ways to go....how much do you want to spend ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: Jfk_gsr
Date Posted: March 18, 2004 at 11:19 PM
no budget for the moment, i want to see what can i have
Posted By: draasch
Date Posted: March 19, 2004 at 6:03 AM
you can go with a Key-2 transponder
AU-SI-N passive starter interrupt
SK200- has a small chip that needs to be insterted before the car will start
------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: xetmes
Date Posted: March 19, 2004 at 6:36 AM
you can use a reed switch, search the internet should bring up many hits
Posted By: Jfk_gsr
Date Posted: March 19, 2004 at 4:53 PM
I think my key have already key transponder reed switch seem to be nice idea Do you think that a can relay that with my electric mirror controler, I want to combine this reed switch with mirror controler (left side or right side) to start my car... Possible ? any Schema or diagram
Posted By: draasch
Date Posted: March 19, 2004 at 5:08 PM
AU-SI-N passive starter interrupt <<<<this unit requires you to turn something on before you can start the car....
a reed switch may not be able to handle the amps when you crank the motor ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: Jfk_gsr
Date Posted: March 19, 2004 at 7:10 PM
AU-SI-N what is it ? sorry newbie You have a example of this!!
Posted By: draasch
Date Posted: March 19, 2004 at 8:49 PM
Posted By: Jfk_gsr
Date Posted: March 19, 2004 at 9:49 PM
magnetic switch can work with au-si-n
Posted By: auex
Date Posted: March 19, 2004 at 10:49 PM
Magnetic switch will work fine for a starter kill. You should not use it for an Ignition kill, the magnet will have to be in place at all times while driving.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: Jfk_gsr
Date Posted: March 19, 2004 at 11:05 PM
Magnet can not change switch on or off ? So the best thing is conventinal switch right!! Which solution will be the best for a car, best for security vs not to hard to access to the switch or other
Posted By: rudbwoy69camaro
Date Posted: March 20, 2004 at 5:59 AM
Jfk_gsr, I've got a good kill switch install. PM me.
-------------
Posted By: geotexz71
Date Posted: March 24, 2004 at 10:21 AM
I've done hidden mag switches and ghost buttom installs. I recommend leaving the traditional starter kill up to an alarm and using this sort of kill for the fuel pump. You can do a lot with a mag switch and a thyristor or latching relay.
Posted By: Jfk_gsr
Date Posted: March 25, 2004 at 12:38 PM
any other suggestion??
|