Erasing Transmitters?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28681
Printed Date: May 10, 2025 at 5:02 AM

Topic: Erasing Transmitters?

Posted By: kelpike
Subject: Erasing Transmitters?
Date Posted: March 19, 2004 at 6:09 PM

I have a previous post about my alarm. "Please Help with Transmitter Programming". I tried the replies, but nothing seems to work. Do I need to erase my transmitter from my alarm after trying so many times to program it? My truck has the auto door lock/unlock when the ignition is turned on & off. I'm wondering if maybe that has something to do with my programming problem. My truck is a 94 full size Chevy Blazer and the alarm is the DEI Python 1500 ESP with remote start.

Replies:

Posted By: draasch
Date Posted: March 19, 2004 at 8:39 PM

i dont use that brand, but most of them will erase the old codes when you program the transmitters...

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: auex
Date Posted: March 19, 2004 at 10:53 PM

The only thing that I can recommend is to make sure that you have the correct remotes for the alarm that you have. DEI has many many different versions of there remotes, so you need to make sure that you have the correct one.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window