Locked Module?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28692
Printed Date: May 10, 2025 at 8:20 PM

Topic: Locked Module?

Posted By: kelpike
Subject: Locked Module?
Date Posted: March 19, 2004 at 8:15 PM

The DEI website instalation manual says that if the learn routines have been programmed with the hand held programmer, they may have been locked. Is there any way to unlock them without the bitwriter?

Replies:

Posted By: auex
Date Posted: March 19, 2004 at 10:51 PM

No. In order to unlock transmitter programming a bitwriter is neccessary. Most installers probably don't lock transmitter programming so you should be safe. If it is locked take it back to the place that did the install and tell them to unlock it.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window