2000 camry keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28827
Printed Date: August 16, 2025 at 12:28 AM

Topic: 2000 camry keyless entry

Posted By: marvel
Subject: 2000 camry keyless entry
Date Posted: March 22, 2004 at 5:29 AM

:errr:can somebody please help me how to install a keyless entry device in my camry 2000? what are the things i should know before doing it?

-------------
turbo

Replies:

Posted By: draasch
Date Posted: March 22, 2004 at 7:31 AM

what brand of keyless entry are you using??

Make: Toyota
Model: Camry
Year: 1999-01

Alarm
Constant 12 volts WHITE & WHITE/ RED IGNITION SWITCH HARNESS
Ignition 12 volts BLACK/ RED IGNITION SWITCH HARNESS
Starter RED IGNITION SWITCH HARNESS
Dome Light RED / WHITE (-) 7 PIN CONNECTOR AT THE FUSE BLOCK
Trunk Pin Switch RED / YELLOW (-) AT LIGHT IN TRUNK
Parking Lamp GREEN (+) 13 PIN CONNECTOR AT THE FUSE BLOCK
Power Lock L GREEN 20 PIN WHITE CONNECTOR
Power Unlock D GREEN IN DRIVER KICK PANEL * #209

* Child Safety Lock - BLUE/RED (-) In Same Connector As Door Lock Wires Above. #209- See Child Safety Lock Diagram.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: Velocity Motors
Date Posted: March 22, 2004 at 7:32 AM

The lock wires are about 18 gauge. They will test only by operating the key in the passenger door lock cylinder, not the rocker switch on the door itself. The installation is very basic and requires minimal wires to be hooked up. Most KE systems are type B (-) and that is what you have on the Camry so it will be a simple wire to wire installation. No relays required.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: marvel
Date Posted: March 23, 2004 at 5:06 AM

Thanks guys

as of the moment my car doesnt have any keyless entry device. so i can just buy KE device and just connect the wires together? do i have to program anything after i connect these wires?

-------------
turbo

Posted By: marvel
Date Posted: March 23, 2004 at 5:09 AM

draasch wrote:

what brand of keyless entry are you using??
Make: Toyota
Model: Camry
Year: 1999-01

Alarm
Constant 12 volts WHITE & WHITE/ RED IGNITION SWITCH HARNESS
Ignition 12 volts BLACK/ RED IGNITION SWITCH HARNESS
Starter RED IGNITION SWITCH HARNESS
Dome Light RED / WHITE (-) 7 PIN CONNECTOR AT THE FUSE BLOCK
Trunk Pin Switch RED / YELLOW (-) AT LIGHT IN TRUNK
Parking Lamp GREEN (+) 13 PIN CONNECTOR AT THE FUSE BLOCK
Power Lock L GREEN 20 PIN WHITE CONNECTOR
Power Unlock D GREEN IN DRIVER KICK PANEL * #209

* Child Safety Lock - BLUE/RED (-) In Same Connector As Door Lock Wires Above. #209- See Child Safety Lock Diagram.

thanks for the reply, but i dont understand the things that you wrote.

what is this "alarm" is it included in the KE device, because i only plan to put Just keyless entry.

are these the wires of the KE device or the wires inside the car?

hope to hear from you.

-------------
turbo

Posted By: draasch
Date Posted: March 23, 2004 at 8:20 AM

most of the wires are the same for K/E and alarm.

you will need the following:
main power
switch 12v ign.
lock wires
you may have a dome light sup. feature
there may be a few more hook ups.

tell me model of K/E you have and i will cross match the wires for you...

if you have a link for that unit that would be great

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt