Print Page | Close Window

BMW Deadbolt Door Lock Diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28840
Printed Date: June 08, 2024 at 4:40 AM


Topic: BMW Deadbolt Door Lock Diagram

Posted By: laren5
Subject: BMW Deadbolt Door Lock Diagram
Date Posted: March 22, 2004 at 1:05 PM

Does anybody know how to properly do the central locking system on a 1996 BMW with Deadbolt Door Lock?   Door locks/unlocks are positive trigger.    Alarm is Avanguard G5.  

I want to properly connect the doorlocks so that when I arm the car (locks) then all the doors are dead bolt locked.

I know that in order to do this I have to send a lock pulse on the lockwire to lock it, and then send another pulse on the disarm wire (within a couple of second) inorder for the car to go into a deadbolt.

Right now, if I lock the car and then I decide that oops I forgot something in the car, I would disarm the car, but what actually happens is that the car will go into the deadbolt system and I have to open it with the key.

Anybody knows of a good way how I can sent a pulse to the disarm wire when arming the car?



-------------
Clifford Alarms



Replies:

Posted By: derek123
Date Posted: March 22, 2004 at 2:36 PM

Don't try to RS when it is deadbolted.

I think the only way to 'un' deadbolt it is to twist the key ( to the right ?) in the door lock cylinder.


Print Page | Close Window