problems with DEI keyless entry
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29151
Printed Date: May 21, 2025 at 4:46 PM
Topic: problems with DEI keyless entry
Posted By: mikew04
Subject: problems with DEI keyless entry
Date Posted: March 27, 2004 at 11:51 PM
I bought a DEI keyless entry for my 94 toyota, and i wired up the locks, parking lights, horn, starter kill, domelight, LED, and valet switch. I used a relay for the domelight supervision, but it does not work. I temporarly connected it to an open channel to test the wiring, and it worked. I dont think the (-) 200mA output wire is sending a signal. Also, my LED has stopped working. How do I test these? I have a DMM.
Thanks alot
Replies:
Posted By: mikew04
Date Posted: March 28, 2004 at 11:29 PM
Isnt there anyone who can tell me how to test the output wire(s)?
Posted By: draasch
Date Posted: March 28, 2004 at 11:34 PM
https://www.the12volt.com/relays/page4.asp#ien
just put your meter probe on each wire of the led ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: Velocity Motors
Date Posted: March 29, 2004 at 8:49 AM
What kind of relay did you use and also how did you wire the relay ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: mikew04
Date Posted: March 29, 2004 at 10:37 AM
30amp Bosch SPDT relay, ran a wire off the domelight wire in the kickpanel, wired that to terminal 87, 86 to +12v, 30 to ground, 85 to the unit
Posted By: mikew04
Date Posted: March 29, 2004 at 11:46 AM
BTW, if i ground 85, the dome lights come on... think its the keyless entry unit itself thats messed up?
thanks
|