Print Page | Close Window

1985 Ford Bronco, APS-996

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29165
Printed Date: May 23, 2025 at 10:41 AM


Topic: 1985 Ford Bronco, APS-996

Posted By: Trav3D1
Subject: 1985 Ford Bronco, APS-996
Date Posted: March 28, 2004 at 8:03 AM

I have recently installed a APS-996 on a 1985 Ford Bronco.  The customer was interested in the paging system, but as you can imagine this car does not have fuel injection.  The led light continues to blink even when the car is started. 

Off the top of my head, I think that its the ignition wire, but I just wanted to throw the question out there.  Any suggestions?

Thanks in advance.



-------------
Trav



Replies:

Posted By: Velocity Motors
Date Posted: March 28, 2004 at 3:09 PM

In most systems that do not have the keyless system attached , if you do not disarm or unlock the system, the LED will continue to blink. Try using the unlock button on the remote and the LED will stop blinking.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window