Passenger Unlock output???

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2920
Printed Date: August 14, 2025 at 5:52 AM

Topic: Passenger Unlock output???

Posted By: sydthomas
Subject: Passenger Unlock output???
Date Posted: August 19, 2002 at 9:32 PM

Does anyone know where to connect the "passenger unlock (-) output" on an ungo ms2000 car alarm? I have located all other connections but have no idea where this goes. I have only the "installation quick reference guide" and believe me it is VERY brief. I got this alarm new and cheap but without complete installation instructions this is not easy for a 2nd time install do-it-yourselfer. Thanks

Replies:

Posted By: Big Dog
Date Posted: August 20, 2002 at 1:00 PM

Hey sydthomas,

I don't do Ungo but it sounds to me like you have drivers door unlock feature on your alarm where you can unlock drivers door and passenger door seperately. If you did your door locks already and they unlock both then simply tape the "passenger unlock (-) output" wire and set it aside. posted_image

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Print Page | Close Window