Print Page | Close Window

99 Galant Power Locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29252
Printed Date: May 11, 2024 at 5:41 PM


Topic: 99 Galant Power Locks

Posted By: joezero
Subject: 99 Galant Power Locks
Date Posted: March 29, 2004 at 12:09 PM

I'm putting a viper 791xv into a 99 Galant.  Everything works fine except the power locks.  The wiring diagram I had said to use a blue/red and blue/black wires at the driver's kick panel.  I found the wires, and they showed voltage breifly when the doors were locked/unlocked.  But when I connected the door lock harness to these wires, I get nothing.  The car has the factory keyless entry.  Do I need to tap into it at that module then?  If so, does anyone know where it's located?  Thanks, Joe



Replies:

Posted By: Javelin3o4
Date Posted: March 29, 2004 at 2:12 PM

12volts

blue / YELLOW
+
ignition harness

StarterBLACK / YELLOW + ignition harness
Second Starter
IgnitionBLACK/ white + ignition harness
Second Ignition
Third Ignition
Accessoryblue/red + ignition harness
Second Accessoryblue/black + ignition harness
Keysense
Power Lockpurple - either kick panel or
Power Unlocklt. GREEN/ red - either kick panel or
Lock Motorblue/red drivers kick panel
Unlock Motorblue/black drivers kick panel
Parking Lights+GREEN / WHITE at the fuse box
Parking Lights-
Hazards
Turn Signal(L)
Turn Signal(R)
Reverse Light
Door TriggerGREEN/ orange - top front of the fuse box
Dome Supervision
Trunk/Hatch Pinwhite - at light in the trunk
Hood Pinblue/black - underdash fuse box
Trunk/Hatch Release
Power Sliding Door
Factory Alarm Arm
Factory Alarm Disarmred - drivers door harness
Disarm No Unlock
Tachometerwhite instrument cluster or
Wait to start
Brake Wiregreen + brake pedal switch
Parking Brake
Horn TriggerGREEN / WHITE +
Memory Seat 1
Memory Seat 2
Memory Seat 3

The Lock/Unlock wires are in a black plug behind the fuse box by a green module.


Print Page | Close Window