Status input wire? 555L remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29253
Printed Date: May 18, 2025 at 12:50 AM

Topic: Status input wire? 555L remote start

Posted By: blazer2
Subject: Status input wire? 555L remote start
Date Posted: March 29, 2004 at 12:16 PM

Just wiring up this 555L on my blazer and wonder what I connect this status input to? According to the installation manual it says connect it to the status output of of a DEI remote start system, but there isnt a wire for that from my G5. Im wondering if its ok to leave it disconnected?

-------------
00 Blazer Zr2 - Custom Box, Excelon 859, Clifford G5
91 Explorer - Alpine, Rattler
87 Rx7 - OEM except under the hood

Replies:

Posted By: blazer2
Date Posted: March 29, 2004 at 2:31 PM

Ok, I just searched around, and found a few confusing answers.

One person said to connect the wire to your ignition 2, but this wire shows +12v when the input requires (-).

Another person suggested the negative ignition wire, but I wasnt aware there was a wire like this on the car.

2000 Blazer. I'll go dig some more.

-------------
00 Blazer Zr2 - Custom Box, Excelon 859, Clifford G5
91 Explorer - Alpine, Rattler
87 Rx7 - OEM except under the hood

Posted By: laren5
Date Posted: March 29, 2004 at 2:36 PM

There is a blue/orange wire on the H3 connector of the intellistart. You should use that blue/orange for your status output (connect this to the 555L)

Good luck

-------------
Clifford Alarms

Posted By: kgerry
Date Posted: March 30, 2004 at 2:28 PM

any wire that says "ground out while running"

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: sroth140
Date Posted: March 30, 2004 at 3:10 PM

even a factory disarm wire would work, but on most DEI brains its a blue or blue/black wire.

-------------
MECP certified installer

Print Page | Close Window