Print Page | Close Window

How to disconnect after market alarm?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29399
Printed Date: May 29, 2024 at 6:43 AM


Topic: How to disconnect after market alarm?

Posted By: sherry775
Subject: How to disconnect after market alarm?
Date Posted: March 31, 2004 at 12:34 PM

Does anyone know how to disconnect an after market alarm? My alarm went off this morning when i had it turned off last night due to the remote no longer working. The remote has to be programmed to the alarm so i have to take the car into the stero place but until then i have no way of starting up my car with the alarm going off. i have a kill switch but its not working.

I disconnected the battery and as soon as i hook the positve back up it works again. Can i take out the fuse? if so, does any one know which fuse it is? I have a 98 Mit Eclipse with a Clifford alarm.

If anyone could help me i would love you.

Thank you



-------------
sherry



Replies:

Posted By: profuse007
Date Posted: March 31, 2004 at 12:52 PM
lets see.....
check under the dash to see some unusual wiring taped up and follow them up to the brain and there should be at least one fuse, usually the blue one is the main power.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).


Print Page | Close Window