Print Page | Close Window

Resetting 508D dual zone motion sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29456
Printed Date: July 05, 2025 at 5:03 PM


Topic: Resetting 508D dual zone motion sensor

Posted By: laren5
Subject: Resetting 508D dual zone motion sensor
Date Posted: April 01, 2004 at 2:41 AM

Does anybody have the info on how to adjust the 508D back to factory???

someone I know has been turning this factory adjust, instead of the two one intended for sensitivity adjust.    Now the 508D does not trigger the alarm.    The internal lights of the 508D wil light up, but does not trigger the alarm.

Can this be re-adjusted, or is it screwed up?

Pls let me know.

thank you   



-------------
Clifford Alarms



Replies:

Posted By: laren5
Date Posted: April 01, 2004 at 3:08 AM

Solution:

it works properly.     The factory adjust was untouched, so msytery solved.

Thanks anyways



-------------
Clifford Alarms


Print Page | Close Window