door chime doesn’t work after R/S install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29497
Printed Date: May 17, 2024 at 10:27 PM
Topic: door chime doesn’t work after R/S install
Posted By: interfire83
Subject: door chime doesn’t work after R/S install
Date Posted: April 01, 2004 at 6:33 PM
I installed a Omega Comfort Start in a 2001 Sunfire and now the door chime doesn't work. I didn't mess with the door pins, and ideas?
Replies:
Posted By: draasch
Date Posted: April 01, 2004 at 7:25 PM
are you talking about the chime not working after you remote start the car??? or it doesnt work at all anymore... ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: Velocity Motors
Date Posted: April 02, 2004 at 12:03 AM
The door chime works through the speaker system of the car along with the databus wire from the stereo. When you bypassed the Passlock II system, did you do anything to the databus wire ??
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: sroth140
Date Posted: April 02, 2004 at 2:21 AM
if it doesnt work at all there is a problem. if it doesnt work during RS, its probably because the radios accy wire isnt powered up. just a guess. i know the radio doesnt have to be on, but if the whole circuit is off, then i dont think the radio can run the amp to power the chime. i know on cavaliers the radio accy is seperate from the blower controls, like most GM's.
-------------
MECP certified installer
Posted By: interfire83
Date Posted: April 02, 2004 at 8:15 PM
the remote start doesn't have anything to do with it then. I replaced the radio too. abd if it goes through the speaker the it's not gonna work. is there a fix?
Posted By: Velocity Motors
Date Posted: April 03, 2004 at 8:47 AM
The databus wire went through the OEM stereo and when you removed the stereo, you lost the door chime function. There are modules available for the door chime to be retained through a special wiring harness. These harnesses run between $ 80 - $100 for this harness. Here's some more information on the system that you have: GM Class 2 Data Bus Information
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|