led

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29531
Printed Date: May 18, 2024 at 1:42 AM

Topic: led

Posted By: Quinci
Subject: led
Date Posted: April 02, 2004 at 6:03 AM

I installed the rs3200+ alarm system into my 2002 Toyota Camry.

It doesn't come with the led status indicator, the connector/wire for it is there.

The voltage output from the alarm unit for the led is 1.8v.

I got a led (red) installed, but it is very dim. Here is my question, how can i tell the operating voltage of an led when no specification available?

What led can i use to increase the intensity of the status indicator?

Thanks in advance.

Replies:

Posted By: Quinci
Date Posted: April 03, 2004 at 9:28 PM

Anyone?

Posted By: cd2478
Date Posted: April 04, 2004 at 1:37 AM

go to your local electronics shop and get a few different LED's with differing voltages, and use them all one by one for the brightest one

Print Page | Close Window